If you’re wondering how to spray paint, there are a few things that you should do first. Using the proper technique will ensure that your paint application is smooth and even. Avoid lingering too long in one spot or changing direction mid-stroke. This can cause paint to pool in one spot and leave an uneven finish. Instead, spray paint horizontal surfaces before completing a second coat. For uneven surfaces, spraying a “tack” coat before starting the next round can prevent paint from running when you move the can back and forth.
When spray painting an interior wall, the first step is to practice on plywood or gyprock. Make sure to start at the lowest pressure possible, as too high of a pressure will lead to runs. Be sure to spray the paint at a low angle, not directly into the wall. It’s also helpful to overlap strokes as this will spread the paint over more surface area. Often, this will still require two coats for complete coverage.
Using the correct spray gun can help you get a flawless finish. However, the paint sprayer requires more preparation, which can make the job more time-consuming and stressful. If you’ve never used a paint sprayer before, here’s how to do it properly: Start from the corners and move toward the ceiling. You want to spray in a steady motion, not in a zigzag pattern. If you’re unsure of the exact angle of your spray gun, try adjusting your sprayer until you reach the corner where you want to paint.
Make sure you clean the surface thoroughly before you start spray painting. If you don’t sand the surface, the paint may wear off prematurely, leaving it uneven. Before spraying, use soap and water to wash the surface thoroughly. For larger items, you can purchase a larger paint tent. A spray tent is useful as it closes automatically when you’re finished. The spray tent also keeps dust and bugs away from the paint.
When painting, remember that a spray paint gun can spread the paint far beyond the surface that you’re painting. As such, it’s important to keep the painting area well ventilated to prevent overspray from the can. If possible, open windows and fans can help. It’s also important to remember that spray paint can damage the surfaces around it, so it’s a good idea to mask off areas where you don’t want paint to spread.
When you’re spray painting, you should wear gloves and wear old clothes so that you don’t get covered with paint. Make sure to purchase the same brand of spray paint cans as you are painting. Remember to keep the workspace well ventilated! Working outdoors is the best way to ensure adequate ventilation, but if you don’t want to work outside, consider opening windows and fans. In addition to avoiding dripping paint, remember to use a good spray paint booth!